NYBY , N2XBY
COPPER CONDUCTOR, PVC INSULATED, GALVANIZED STEEL TAPE ARMOURED AND PVS SHEATED
Identification of Cores :
| Twin-Cores | : | Blue, Black |
| Three-Cores | : | System I Green with yellow stripe ( G/Y ), Blue, Brown System O Brown, Black, Grey |
| Four-Cores | : | System I Green with yellow stripe ( G/Y ), Brown, Black, Grey System O Blue, Brown, Black, Grey |
| Five-Cores | : | System I Green with yellow stripe ( G/Y ), Blue, Brown, Black, Grey System O Blue, Brown, Black, Grey, Black |
| Above Five Cores | : | Black with white number |
Construction:
1. Conductor : Annealed Copper Wire
2. Insulation : Extruded PVC or XLPE
3. Inner Sheath : Extruded PVC (Black Color)
4. Armour : Double Galvanized Steel Tape
5. Outer Sheath : Extruded PVC (Black Color)
Special Features on Request:
• Tinned Copper Wire
• Heat Resistant
• Oil Resistant
• Flame Retardant Cat. A. B. or C
• Flame Retardant Non Category
• Nylon Coated
• Anti Termite
• Anti Rodent
• PVC Low Smoke Low Halogen
• Low Smoke Zero Halogen
Symbol : NYBY (CU/PVC/DSTA/PVC), N2XBY (CU/XLPE/DSTA/PVC)
| Size Ranged | : |
4 x 1.5 ... 300mm² |
| Applicable Standard | : | Specification: SNI IEC 60502-1, IEC 60502-1 Other Specification are available on request |
| Application | : | Indoor and outdoor installation direct burial |
| Item Number | Nominal Size | Reisitance at 20 ? | Current Carrying Capacity at 30 ? | Short Circuit Current at 1 Sec. | AC Voltage Test | |
|---|---|---|---|---|---|---|
| Conductor | Insulation | |||||
| sqmm | Ohm/Km | M. Ohm/Km | Ampere | kA | kV/5 min | |
| 2 x 1.5 | 12.1 | 50 | 18 | 0.17 | 3.5 | |
| 2 x 2.5 | 7.41 | 50 | 25 | 0.29 | 3.5 | |
| 2 x 4 | 4.61 | 50 | 34 | 0.46 | 3.5 | |
| 2 x 6 | 3.08 | 40 | 44 | 0.7 | 3.5 | |
| 2 x 10 | 1.83 | 30 | 60 | 1.16 | 3.5 | |
| 2 x 16 | 1.15 | 30 | 80 | 1.86 | 3.5 | |
| 2 x 25 | 0.727 | 30 | 105 | 2.9 | 3.5 | |
| 2 x 35 | 0.524 | 20 | 138 | 4.06 | 3.5 | |
| 3 x 1.5 | 12.1 | 50 | 18 | 0.17 | 3.5 | |
| 3 x 2.5 | 7.41 | 50 | 25 | 0.29 | 3.5 | |
| 3 x 4 | 4.61 | 50 | 34 | 0.46 | 3.5 | |
| 3 x 6 | 3.08 | 40 | 44 | 0.7 | 3.5 | |
| 3 x 10 | 1.83 | 30 | 60 | 1.16 | 3.5 | |
| 3 x 16 | 1.15 | 30 | 80 | 1.86 | 3.5 | |
| 3 x 25 | 0.727 | 30 | 105 | 2.9 | 3.5 | |
| 3 x 35 | 0.524 | 20 | 130 | 4.06 | 3.5 | |
| 3 x 50 | 0.387 | 20 | 160 | 5.75 | 3.5 | |
| 3 x 70 | 0.268 | 20 | 200 | 8.05 | 3.5 | |
| 3 x 95 | 0.193 | 20 | 245 | 10.93 | 3.5 | |
| 3 x 120 | 0.153 | 20 | 285 | 13.8 | 3.5 | |
| 3 x 150 | 0.124 | 20 | 325 | 17.25 | 3.5 | |
| 3 x 185 | 0.0991 | 20 | 370 | 21.28 | 3.5 | |
| 3 x 240 | 0.0754 | 20 | 435 | 27.6 | 3.5 | |
| 3 x 300 | 0.0601 | 20 | 500 | 34.5 | 3.5 | |
| 4 x 1.5 | 12.1 | 50 | 18 | 0.17 | 3.5 | |
| 4 x 2.5 | 7.41 | 50 | 25 | 0.29 | 3.5 | |
| 4 x 4 | 4.61 | 50 | 34 | 0.46 | 3.5 | |
| 4 x 6 | 3.08 | 40 | 44 | 0.7 | 3.5 | |
| 4 x 10 | 1.83 | 30 | 60 | 1.16 | 3.5 | |
| 4 x 16 | 1.15 | 30 | 80 | 1.86 | 3.5 | |
| 4 x 25 | 0.727 | 30 | 105 | 2.9 | 3.5 | |
| 4 x 35 | 0.524 | 20 | 130 | 4.06 | 3.5 | |
| 4 x 50 | 0.387 | 20 | 160 | 5.75 | 3.5 | |
| 4 x 70 | 0.268 | 20 | 200 | 8.05 | 3.5 | |
| 4 x 95 | 0.193 | 20 | 245 | 10.93 | 3.5 | |
| 4 x 120 | 0.153 | 20 | 285 | 13.8 | 3.5 | |
| 4 x 150 | 0.124 | 20 | 325 | 17.25 | 3.5 | |
| 4 x 185 | 0.0991 | 20 | 370 | 21.28 | 3.5 | |
| 4 x 240 | 0.0754 | 20 | 435 | 27.6 | 3.5 | |
| 4 x 300 | 0.0601 | 20 | 500 | 34.5 | 3.5 | |
| 5 x 1.5 | 12.1 | 50 | 18 | 0.17 | 3.5 | |
| 5 x 2.5 | 7.41 | 50 | 25 | 0.29 | 3.5 | |
| 5 x 4 | 4.61 | 50 | 34 | 0.46 | 3.5 | |
| 5 x 6 | 3.08 | 40 | 44 | 0.7 | 3.5 | |
| 5 x 10 | 1.83 | 30 | 60 | 1.16 | 3.5 | |
| 5 x 16 | 1.15 | 30 | 80 | 1.86 | 3.5 | |
| 5 x 25 | 0.727 | 30 | 105 | 2.9 | 3.5 | |
| 5 x 35 | 0.524 | 20 | 130 | 4.06 | 3.5 | |
- Minimum bending radius:
- Installed : 12 x OD
